Dance Dance Revolution

So I’ve finally got some pictures of how the wiring went.. not much but it will suffice. Here’s the board after cleaning off the black stuff with an abrasive bit. I tinned all the leads as well. There’s 5 legs… Continue Reading →

Now that I have the triggers all figured out, it’s time to start finishing this up! All the wired leads were soldered onto the metal sheets with rosin core, which seems to bond the wire well. As you can see… Continue Reading →

After the stainless was cut down to size with tin snips, I clamped the wood and steel together and then bent down the steel with a rubber mallet. Before I bent the pieces, I had tacked the metal down to… Continue Reading →

There was a point and time where I was addicted to Dance Dance Revolution. I began using Stepmania after not wanting to spend a ton of quarters at the arcade, and ran the core songs from all of DDR and… Continue Reading →